What is TPR gold
Gold is considered a gold powder but is full of impurities other than gold. It is also known as a black stone that resembles salt or gunpowder so that it shines when exposed directly to the sun, or when highlighted in a dark place. To determine whether or not it is deposited in water, gold and silver are deposited at the bottom of the vessel and impurities float on the surface. [1] To separate the gold from the raw material, the methods of extracting the gold material vary depending on the type of sediment attached to it, there are steps that are necessary to obtain Gold: how to obtain raw materials, and separation process The gold material for the raw material through the transfer of raw materials to special mills to be separated, and when exploring for gold are these operations in the site of sediment, where the mining of sediments or veins in the ground in the same way drilling for coal, and prospectors follow the metal veins By drilling a corridor
vertically into the ground, some ores are found on the surface of the earth by fracturing rocks using blasting, then the rocks containing gold are taken and sent to the mills to separate the gold from the rocks and impurities, or by hydraulic pumping by impulsive water pumping. Severe The rocks that contain the gold are dredged towards vessels with grooves to hold the gold, and another way through the crane, which is a working machine to explore for gold by energy have several buckets installed on a boat, so that each bucket capacity of about 0.2 m, These buckets are lowered by the lever and rotate in order to lift gravel from the bottom of the river, and the crane has several devices that separate gold from any other materials attached to it. [2] Methods of separating gold from raw materials or from water There are three ways to separate Gold for raw materials or water, which is: [3] Floatation method: This method Counting blasting and drilling
after Alhosor gold ore, where the extraction of gold by doing grinding raw sieved and then processed by flotation or flotation to separate the metal. Cyanide method: It is one of the advanced and modern methods, is done by spraying the raw material with a solution of cyanide, which dissolves gold and is passed on the granules of carbon found in electrical columns to precipitate gold. Carbon pulp method: Cyanide is also used by mixing the crushed raw material into the water to obtain a pulp and then dissolving it in the cyanide solution. Hot and caustic to extract gold from carbon.
